(Created page with "Po tomto nastavení by mělo být vše již v pořádku, pokud jednotlivé kanály kmitají příliš (mění svou hodnotu), může to znamenat již velké opotřebení vysíl...")
Po tomto nastavení by mělo být vše již v pořádku, pokud jednotlivé kanály kmitají příliš (mění svou hodnotu), může to znamenat již velké opotřebení vysílače, resp. potenciometrů. Tento jev lze kompenzovat zvýšením pásma necitlivosti, jemuž se věnuje později záložka ''Pokročilé.''
+
After these adjustments, everything should be configured with regards to the transmitter.
+
If some channels oscillate around the center, it may mean wear of the transmitter potentiometers. This can be compensated for by increasing stick deadband in the ''Advanced tab.'' (Covered later)
Latest revision as of 11:03, 16 September 2016
After these adjustments, everything should be configured with regards to the transmitter.
If some channels oscillate around the center, it may mean wear of the transmitter potentiometers. This can be compensated for by increasing stick deadband in the Advanced tab. (Covered later)