Difference between revisions of "SpiritRS Binding"

From Spirit System Manual
Jump to: navigation, search
(Binding Procedure)
Line 8: Line 8:
 
#Radio will ask if you wish to Bind to the receiver. Confirm by pressing Yes button.
 
#Radio will ask if you wish to Bind to the receiver. Confirm by pressing Yes button.
  
[[File:spritrs-bind.jpg|width=300px]]
+
[[File:spritrs-bind.jpg]]

Revision as of 14:28, 2 June 2020

In order to Bind Spirit RS with your radio use supplied Bind plug.

Binding Procedure

  1. Insert Bind plug in the SYS port and connect Power supply to the Spirit unit.
  2. Spirit unit will start to blink with the Status LED periodically.
  3. Then power up your radio.
  4. Radio will ask if you wish to Bind to the receiver. Confirm by pressing Yes button.

Spritrs-bind.jpg