SpiritRS Preparation

From Spirit System Manual
Revision as of 19:57, 13 May 2020 by Admin (Talk | contribs) (Created page with "To operate Spirit RS unit any JETI DUPLEX radio can be used. Supported radios are: * DC-14 * DC-16 * DC-16 II * DC-24 * DS-12 * DS-14 * DS-16 * DS-24 We recommend to start w...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To operate Spirit RS unit any JETI DUPLEX radio can be used.

Supported radios are:

  • DC-14
  • DC-16
  • DC-16 II
  • DC-24
  • DS-12
  • DS-14
  • DS-16
  • DS-24

We recommend to start with clear model profile as you will need only few changes.

Spirit System offer DS-12 radio tailored specially for the Spirit RS. This mean you will be able to utilize completely all features out of the box.

1 Beginning

First from all you should carefully read radio manual. Once you understand all the particulars you can change Mode if needed. This is fully described in the included manual. When securing bottom cover after Mode change please pay extra attention that no cable is in way of a screw.

Secondly remove cover made of foil from display.

2 Turning On and Off

By pressing Power button you should be able to start the radio. If not, please use supplied charger and charge the battery. By pressing the Power button again, you can turn radio off.

Retrieved from "https://manual.spirit-system.com/index.php?title=SpiritRS_Preparation&oldid=30206"