Translations:Governor/36/en
From Spirit System Manual
Revision as of 11:47, 18 February 2017 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
Verify that the Throttle Range of your ESC or Throttle servo is configured properly. Usually the problem is caused by exceeded limit for the full throttle defined by Throttle Range - Max. value. For example, if the top limit in the ESC is programmed to 1800μs but the unit has configured 1900μs, then the unit will be 100μs over the real limit. Thus during a high load it could take a few seconds until the value will drop under 1800μs in this case.
