Futaba PPM
From Spirit System Manual
Revision as of 10:10, 21 September 2017 by Admin (Talk | contribs) (Created page with "In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout. == Software Channel Mapping == S...")
In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout.
1 Software Channel Mapping
Set the channel mapping in the General/Channels window to:
Trottle: Channel 1 Aileron: Channel 2 Elevator: Channel 3 Rudder: Channel 6 Gyro Gain: Channel 4 Pitch: Channel 5 Bank: Channel 7 (optional)
2 Transmitter Channel Mapping
Throttle: Channel 1 Aileron: Channel 2 Elevator: Channel 3 Rudder: Channel 4 Gyro Gain: Channel 5 Pitch: Channel 6 Bank: Channel 7 (optional)
