Translations:GeoLink Mounting/15/en
From Spirit System Manual
Revision as of 16:07, 28 July 2018 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
Each circuit containing antennas is very carefully designed to achieve correct impedance. Impedance is electrical property which is directly determining performance of antenna. Impedance is changing immediately by placing any parts close to the circuit, especially near antenna. Because PCB is acting as a part of GPS antenna any change to the PCB, including screws has noticeable impact. Thus we highly do not recommend doing any hardware changes to GeoLink module.
