Translations:Spektrum SRXL2/25/en
From Spirit System Manual
Revision as of 10:51, 13 February 2020 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
Now you are ready to power up the unit. If your Power supply is not connected yet, we recommend to connect it to the AUX1, AUX2 and/or CH0 port. Before you can utilize the Spektrum integration connection, it is important to set the SRXL2 receiver type in the General tab of the software. Please start the Spirit Settings and change the receiver type as displayed on the photo. Then save the settings (e.g. by CTRL+S) or the Backup tab/Unit - Save and restart the unit.
