Futaba PPM

From Spirit System Manual
Revision as of 09:12, 21 September 2017 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout.

These receivers are labelled with SP mark.

1 Software Channel Mapping

Set the channel mapping in the General/Channels window to:

  • Trottle: Channel 1
  • Aileron: Channel 2
  • Elevator: Channel 3
  • Rudder: Channel 6
  • Gyro Gain: Channel 4
  • Pitch: Channel 5
  • Bank: Channel 7 (optional)

2 Transmitter Channel Mapping

  • Throttle: Channel 1
  • Aileron: Channel 2
  • Elevator: Channel 3
  • Rudder: Channel 4
  • Gyro Gain: Channel 5
  • Pitch: Channel 6
  • Bank: Channel 7 (optional)