Difference between revisions of "HobbyWing Telemetry/cs"

From Spirit System Manual
Jump to: navigation, search
(Created page with "Servo konektor propojky Telem UNI se zapojí na stranu regulátoru - do programovacího portu (P).")
(Created page with "Připojte baterii k regulátoru a spusťte konfigurační program Spirit Settings běžným způsobem.")
Line 21: Line 21:
 
== Spirit Settings ==
 
== Spirit Settings ==
  
Power up the ESC and start the Spirit Settings as usually.
+
Připojte baterii k regulátoru a spusťte konfigurační program Spirit Settings běžným způsobem.
  
 
=== Telemetry activation ===
 
=== Telemetry activation ===

Revision as of 14:38, 21 April 2017

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎magyar • ‎italiano • ‎русский

Regulátory HobbyWing Platinum V4 zasílají telemetrii pomocí programovacího portu. Tímto je zprostředkován přenos dat až do jednotky. Pro fungování ESC telemetrie je nezbytné mít aktuální verzi firmware v regulátoru otáček. Starší verze firmware tuto podporu nemají.

1 Telemetrická propojka

Telemtrické data je možné přenášet skrze speciální propojku Telem UNI. Je dostupná na našem Eshopu.

Telemuni.png

2 Zapojení

Zapojte kablík telemetrie do primárního portu pro Spektrum satelit. U menších jednotek Spirit se použije nativní port pro satelit Spektrum.

Unit-telemuni.jpg

Servo konektor propojky Telem UNI se zapojí na stranu regulátoru - do programovacího portu (P).

Esc-hw.jpg

3 Spirit Settings

Připojte baterii k regulátoru a spusťte konfigurační program Spirit Settings běžným způsobem.

3.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the HobbyWing Platinum V4 option.

Esc-telem-hw.png

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

4 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

5 Supported models

Model

Battery Voltage

Battery Current

Consumed Capacity

ESC Temperature

Platinum 60A V4 x x
Platinum 80A V4
Platinum 120A V4
Platinum HV 130A V4
Platinum HV 130A OPTO V4
Platinum HV 160A V4
Platinum HV 200A OPTO V4

Info.png Consumed Capacity is calculated from the Current Consumption.