Difference between revisions of "HobbyWing Telemetry/de"

From Spirit System Manual
Jump to: navigation, search
(Updating to match new version of source page)
(Created page with "HobbyWing Platinum V4 ESC verfügt über eine Telemetrie-Funktion, die im Programmieranschluss eingebaut ist. Dies ermöglicht eine telemetrische Datenübertragung an das Ger...")
Line 1: Line 1:
 
<languages />
 
<languages />
  
HobbyWing Platinum V4 ESC has telemetry feature built-in in the Programming port. This allows telemetry data transmission to the unit.
+
HobbyWing Platinum V4 ESC verfügt über eine Telemetrie-Funktion, die im Programmieranschluss eingebaut ist. Dies ermöglicht eine telemetrische Datenübertragung an das Gerät.
To allow the ESC telemetry, it is necessary to have updated ESC as the older firmware versions were not supporting it.
+
Um die ESC-Telemetrie zu ermöglichen ist es notwendig, das ESC zu aktualisieren, da die älteren Firmware-Versionen es nicht unterstützten.
  
 
== Telemetry Cable ==
 
== Telemetry Cable ==

Revision as of 11:24, 20 August 2017

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎magyar • ‎italiano • ‎русский

HobbyWing Platinum V4 ESC verfügt über eine Telemetrie-Funktion, die im Programmieranschluss eingebaut ist. Dies ermöglicht eine telemetrische Datenübertragung an das Gerät. Um die ESC-Telemetrie zu ermöglichen ist es notwendig, das ESC zu aktualisieren, da die älteren Firmware-Versionen es nicht unterstützten.

1 Telemetry Cable

To allow the telemetry data transmission special cable is required. This cable is available in our Eshop.

Telemuni.png

2 Interfacing

Connect the Telemetry cable to the primary Spektrum satellite port in the unit. Smaller Spirit units will utilize the one native Spektrum satellite port.

Unit-telemuni.jpg

Servo connector of the Telem UNI cable should be connected to the ESC - programming port (P).

Esc-hw.jpg

3 Spirit Settings

Power up the ESC and start the Spirit Settings as usually.

3.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the HobbyWing Platinum V4 option.

Esc-telem-hw.png

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

4 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

5 Supported models

Model

Battery Voltage

Battery Current

Consumed Capacity

ESC Temperature

RPM

Platinum 60A V4 x x
Platinum 80A V4
Platinum 120A V4
Platinum HV 130A V4
Platinum HV 130A OPTO V4
Platinum HV 160A V4
Platinum HV 200A OPTO V4

Info.png Consumed Capacity is calculated from the Current Consumption.