Difference between revisions of "HobbyWing Telemetry/de"

Revision as of 12:25, 20 August 2017

HobbyWing Platinum V4 ESC verfügt über eine Telemetrie-Funktion, die im Programmieranschluss eingebaut ist. Dies ermöglicht eine telemetrische Datenübertragung an das Gerät. Um die ESC-Telemetrie zu ermöglichen ist es notwendig, das ESC zu aktualisieren, da die älteren Firmware-Versionen es nicht unterstützten.

1 Telemetriekabel

Um die Telemetrie-Datenübertragung zu ermöglichen, ist ein spezielles Kabel erforderlich. Dieses Kabel ist in unserem Eshop erhältlich.

2 Schnittstellen

Connect the Telemetry cable to the primary Spektrum satellite port in the unit. Smaller Spirit units will utilize the one native Spektrum satellite port.

Servo connector of the Telem UNI cable should be connected to the ESC - programming port (P).

3 Spirit Settings

Power up the ESC and start the Spirit Settings as usually.

3.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the HobbyWing Platinum V4 option.

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

4 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

• JETI Duplex
• FrSky Taranis & Horus
• Graupner HoTT
• Spektrum Integration

5 Supported models

Consumed Capacity is calculated from the Current Consumption.