Hyperion RPM Sensor

From Spirit System Manual
Revision as of 14:04, 12 April 2018 by Admin (Talk | contribs) (Marked this version for translation)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Other languages:
čeština • ‎Deutsch • ‎English • ‎magyar • ‎italiano • ‎русский

Hyperion RPM Sensor is standard unit for measuring RPM from one phase wire.

Hyperion-rpm-sensor.jpg

Required modification

For usage with the Spirit units a small modification of the RPM cable is needed.

  • Move the White cable to the middle in a new Servo connector/plug.
  • You can do so with a needle easily.

Hyperion-rpm-mod.jpg

Wire layout
White wire: RPM Output Signal (PIT pin)
Red wire: BEC Voltage (AUX1/AUX2/CH0 or other power supply port)
Black wire: Ground (AUX1/AUX2/CH0 or other power supply port)

Hyperion-rpm-connection.jpg

Connect the cables according the photo now.