Spektrum PWM connection

From Spirit System Manual
Revision as of 14:01, 19 January 2017 by Admin (Talk | contribs)

Jump to: navigation, search
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎magyar • ‎italiano • ‎русский

This table is describing connection of the Spektrum AR6210 receiver. Because labels are same between other receivers you can use it also for other AR receivers.

PWM Wiring

S9.png
UNIT RECEIVER
RUD RUDD
AUX GEAR
ELE/PIT/AIL ORANGE wire to AILE
RED wire to AUX 1
BROWN wire to ELEV

Info.png Servo connectors are connected always with Orange wire closer to the labels (in the receiver and unit as well).

Info.png Special cable which ends with 3 servo connectors must be connected in the way, that these wires are always closer to the port labels.

ESC should be connected to the THRO port.