Телеметрия TelMe

From Spirit System Manual
Revision as of 07:35, 11 December 2018 by Gstatopen (Talk | contribs) (Created page with "Подключите телеметрийный кабель к основному порту Spektrum сателлита. В младших версиях Spirit он еди...")

Jump to: navigation, search
Other languages:
čeština • ‎Deutsch • ‎English • ‎magyar • ‎italiano • ‎русский

Регуляторы Kontronik используют специальный 5 штырьковый разъем для передачи данных телеметрии. Что использовать телеметрию регулятора, необходимо обновить его прошивку до версии 1.13 или выше. Старые версии не поддерживают протокол TelMe.

1 Телеметрийный кабель

Для использования телеметрии необходим кабель Telem KONTRONIK v2 который доступен в нашем магазине.

Telemkontronikv2.png

Warning.png We do not recommend to make this cable at home since improper connection will cause permanent damage of the unit.

2 Подключение

Подключите телеметрийный кабель к основному порту Spektrum сателлита. В младших версиях Spirit он единственный.

Unit-telemuni.jpg

Servo connector of the Telem KONTRONIK v2 cable should be connected to the ESC. In case of Kontronik KOSMIK you can select any free port.

Esc-kontronik.jpg

3 Spirit Settings

Power up the ESC and start the Spirit Settings as usually.

3.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the Kontronik TelMe option.

Esc-telem-telme.png

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

4 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

5 Supported models

Model

Battery Voltage

Battery Current

BEC Voltage

Consumed Capacity

ESC Temperature

RPM

KOLIBRI 140 LV
JIVE PRO 80+ HV
JIVE PRO 120+ HV
KOSMIK 160 HV
COOL KOSMIK 160 HV
KOSMIK 200 HV
COOL KOSMIK 200+ HV
COOL KOSMIK 200 HV GOLD