Translations:Configuration/316/en
From Spirit System Manual
Revision as of 10:17, 19 September 2016 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
In case that your ESC has no RPM output you will need a separate RPM sensor that can be connected to phases of the motor. Important is to power the sensor properly. Voltage can't exceed allowed level for the sensor. Recommended voltage range can be obtained from the sensor manufacturer. In case that the sensor require 3.3V you can connect it to the satellite connector in the unit (Details in the following photo). You can also use the Spektrum adapter.
