Translations:Configuration/443/en
From Spirit System Manual
Revision as of 00:01, 4 August 2018 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
With µSpirit units it is possible to enable support for the tail rotor driven by dedicated motor. In this case two ESCs are used, where Rudder ESC is connected at the CH4 port. Important thing is to set Limits/Rudder ESC - range appropriately since these are defining available Throttle range for the ESC from 0 to 100%. Normally this parameter is available in the Setup Wizard.
