Translations:Configuration/67/en
From Spirit System Manual
Revision as of 11:53, 19 September 2016 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
This functionality is enabled only when the configuration software is not connected. This will prevent from a possible collisions. As soon as the software is disconnected, selected parameter is configured by the channel value. In case that the software is started again, it will keep value from realtime tuning in it's memory. However, with opened software policy described above will be applied again (Realtime tuning is inactive and value will be intact even if channel is changed).
