Translations:Unequal Collective Pitch/5/en
From Spirit System Manual
Revision as of 10:33, 9 April 2018 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
Collective Pitch Low and High position
- Make sure that your Collective Pitch curve in the radio is configured to be -100% to 100% (Linear curve). NOTE: In some radios the lowest position starts at 0% but this is not a problem.
- Put your Pitch stick at the lowest position - at this point you have to see -100% in the Diagnostic tab at the Pitch bar. If value is diffrent by more than +/- 2% it is recommended to use the Travel Adjust for Pitch channel in your radio.
- Do the same verification for the highest position - at this point you have to see 100% at the Pitch bar.
- If this point are correct and you can see +/- 100% then your radio is configured correctly and you can move at the mechanics configuration.
