Difference between revisions of "Translations:Wiring/29/en"

From Spirit System Manual
Jump to: navigation, search
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
−
The unit is powered by two cables from the receiver connected to AUX and RUD positions. The Throttle cable should be connected to the receiver as well.
+
The unit is powered by two cables from the receiver. These are connected to the AUX and RUD positions. The Throttle (ESC or Throttle servo) should be connected to the receiver.

Latest revision as of 23:49, 8 January 2017

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Wiring)
The unit is powered by two cables from the receiver. These are connected to the AUX and RUD positions. The Throttle (ESC or Throttle servo) should be connected to the receiver.
TranslationThe unit is powered by two cables from the receiver. These are connected to the AUX and RUD positions. The Throttle (ESC or Throttle servo) should be connected to the receiver.

The unit is powered by two cables from the receiver. These are connected to the AUX and RUD positions. The Throttle (ESC or Throttle servo) should be connected to the receiver.

Retrieved from "https://manual.spirit-system.com/index.php?title=Translations:Wiring/29/en&oldid=6822"