Difference between revisions of "Updating Spirit unit"
From Spirit System Manual
| Line 1: | Line 1: | ||
Spirit unit can be updated easily in the Spirit Settings software. | Spirit unit can be updated easily in the Spirit Settings software. | ||
| − | Please download the latest Spirit Settings software from [https://spirit-system.com/download.php Spirit System Download section] first. | + | Please download and install the latest Spirit Settings software from [https://spirit-system.com/download.php Spirit System Download section] first. |
== Updating process == | == Updating process == | ||
Revision as of 16:02, 4 January 2023
Spirit unit can be updated easily in the Spirit Settings software.
Please download and install the latest Spirit Settings software from Spirit System Download section first.
1 Updating process
- Start the Spirit unit normally - all servos, battery, ESC can remain plugged in as usually.
- Launch the Spirit Settings software - a dialog window about version mismatch can popup.
- Go to the Update tab.
- You can select which firmware should be downloaded from the Firmware List. By default the latest one is selected.
- Press the Flash button.
- Flashing should start immediately and should not take more than one minute.
- After flashing you can wait until unit will boot up, close the software and open it again.
2 In case of a problem
If flashing will not start or fail for whatever reason, you can perform Recovery process. In that case please proceed according Flashing Failed page.
