Wifi-Link

From Spirit System Manual
Revision as of 10:32, 20 January 2017 by Buell47 (Talk | contribs) (Created page with "(Nur für erfahrene Benutzer)")

Jump to: navigation, search
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎magyar • ‎italiano • ‎русский
Wifi-Link
Bedienungsanleitung
107.jpg



1 Kenndaten

Stromversorgung: 3.3V - 15V
Gewicht: 7g
Maße: 21x32x5.5mm
Arbeitsbereich: bis zu 50 Meter
Betriebsarten: AP, AP+Client, Client
Standards: 802.11b/g/n
Verschlüsselung: Open, WEP, WPA, WPA2
Konfiguration: Web Interface
Stromverbrauch: 80 – 350mA

Unterstütze Geräte:

  • Android (Verfügbar bei Google Play)
  • Alle Smartphones, Tablets, Smart TV mit Web-Browser
  • PC
  • Mac


Unterstützung für Firmware-Updates.
Webbasierte Spirit Einstellungs-Anwendung im Modul!

2 ANSCHLUSS

Wifi0.png
Beispiel: Verkabelung Fotos


Anschlussbelegung
VCC Positives Anschlusskabel: 3.3V – 15V
GND Negatives Anschlusskabel
RX Kommunikationskabel; SYS-Anschluss
TX Kommunikationskabel; SYS-Anschluss


Info.png TX-Kabel immer näher zum SYS-Aufkleber sein. RX-Kabel muss immer in der Mitte des SYS-Anschlusses liegen.
VCC und GND können an jeden Port angeschlossen werden, außer an ELE/PIT/AIL und SYS. Es kann auch an einen Empfängeranschluss angeschlossen werden. Wenn es von einer separaten Batterie gespeist wird, muss GND an die Stromquelle des Geräts angeschlossen werden.

Warning.png Schließen Sie das Kommunikationskabel nicht an die Stromversorgung an! Es kann nur an den SYS-Anschluss angeschlossen werden.

3 KONFIGURATION

Spirit Wifi-Link bietet Ihnen eine benutzerfreundliche Konfiguration von jedem Gerät, das eine WiFi-Verbindung und Webbrowser unterstützt.

Um es zu öffnen, können Sie so vorgehen:

  1. Verbindung mit dem Wifi-Modul.
    Standard-SSID (Wifi-Modul Name): Spirit Wifi-Link.
    Das Modul ist standardmäßig im Acess Point mode.
    Sie können eine Verbindung zum AP direkt auf normale Weise herstellen.
    Nach der Verbindung erhält Ihr Gerät automatisch die IP-Adresse.
  2. Öffnen Sie Ihren Webbrowser.
    Normalerweise kann jeder moderne Webbrowser mit JavaScript-Unterstützung verwendet werden.
  3. Rufen Sie das Modul mit dieser Adresse auf: http://192.168.4.1
    Durch Eingabe von "192.168.4.1" gelangen Sie in die Konfiguration. Hier können Sie alle Parameter ändern, einschließlich SSID, Passwort oder Wireless-Modus.

Mit der neuesten Modul-Firmware ist Spirit Settings direkt über Ihren Webbrowser erreichbar!

Wifi2.png


Info.png Für Anfänger empfehlen wir die Voreinstellungen.

AP+Client Mode (Nur für erfahrene Benutzer)

Module is able to connect to an existing WiFi station (e.g. your home site). By entering the configuration interface, you can set the AP+Client mode. In this mode you can find your network and connect to it. In this way, module can be accessed from any device, that is connected to your WiFi site, even via an ethernet cable.
If you are connected to an existing WiFi station, the module will receive second IP address. You can find such IP address in the configuration interface.
You can connect to the interface from the second IP address when accessing from your network. You can also access the internet or module at the same time.

Connecting to an existing network

  1. Connect to the Spirit Wifi-Link.
  2. Enter the WiFi Client section in the web interface.
  3. Click the „Switch to AP+Client mode“ (if not already).
  4. Wait a few seconds to display all available Wi-Fi networks.
  5. In the WiFi Association select Wi-Fi network you want to connect.
  6. Enter password of the Wi-Fi network (if required).
  7. Click the Connect button and wait for the success notification.
  8. Remember the address that will appear in the „WiFi address“ entry – this IP address should be used to connect the module through the network you are connected to.

4 USAGE

When Spirit unit with the module are running, you can proceed with the following steps:

Web Browser - iOS, WP, Sailfish OS, PC, Mac, ...

  1. Go to the Settings/Wi-Fi in the system, search for a new networks.
  2. Connect to the „Spirit Wifi-Link ...“ network.
  3. Enter the module with this address: http://192.168.4.1
  4. Click the Spirit Settings in the Menu of the Wifi-Link interface

The best experience with Chrome, Firefox, Safari web browsers.

Native Android app

  1. Download the latest „Spirit Settings“ app from the Google Play.
  2. Go to the Settings/Wi-Fi in the Android, search for a new networks.
  3. Connect to the „Spirit Wifi-Link ...“ network.
  4. Open the Spirit Settings app.
  5. Go to the Connection and select WIFI device.
  6. Click the Connect button and you are ready

Native PC & Mac app

  1. Download and install the Spirit Settings software from Spirit System web page. Required version is at least 2.0.2.
  2. Go to the Wi-Fi settings in the system, search for a new networks.
  3. Connect to the „Spirit Wifi-Link ...“ network.
  4. Start the Spirit Settings app in the Demo mode
  5. Press CTRL+W to open Wifi-Link window and confirm the IP.
  6. Close and start the app again – connection should work now.