https://manual.spirit-system.com/index.php?action=history&feed=atom&title=Translations%3AConfiguration%2F240%2FenTranslations:Configuration/240/en - Revision history2026-07-24T09:18:39ZRevision history for this page on the wikiMediaWiki 1.26.2https://manual.spirit-system.com/index.php?title=Translations:Configuration/240/en&diff=2403&oldid=prevFuzzyBot: Importing a new version from external source2016-09-16T11:13:34Z<p>Importing a new version from external source</p>
<p><b>New page</b></p><div>For proper operation of the Spirit unit, it is necessary to set this parameter correctly. Here, the unit is switched to a special mode for settings 6° of cyclic pitch on the main blades. It is necessary to set the value so that the blades angle is at 6° in the aileron axis. You need to rotate your rotor head with blades to be parallel to the longitudinal axis of the model. A higher value increases the angle; a lower one decreases the angle. Optimal head geometry should be in the range of about 90 – 160. If not in this range, it is recommended to adjust the distance of a ball link on the servo horns or perform other mechanical adjustments.</div>FuzzyBot