Difference between revisions of "Translations:Configuration/97/zh-hant"

Vibrations are transmitted to each axes dependent on several, various factors. Frequencies and magnitude are dependent on the model construction. Generally, the vibrations are the highest on Y axis (aileron) but we recommend you check all axes each time you are doing measurement.
However vibrations should not exceed 50% for all axes at any time.
In the case vibrations are at 90% or more, the model has an issue that needs to be rectified.
Should the magnitude exceed 90% on any of the given axes, it is
recommended to fix whatever issue is causing these extreme vibrations before flying the model. Even though Spirit FBL unit is highly resistant to vibrations, these could cause unwanted interactions with the Spirit FBL unit and could also cause mechanical failure of the model. Such high vibrations can cause Loctite to fail and other mechanical parts to break.