Difference between revisions of "Translations:Futaba Telemetry/78/en"

Revision as of 08:56, 18 August 2017

'''Modification of the longer end'''
#Use a needle to free-up the Red wire from the plastic.
#Then plug the Red wire from the middle to a separate servo plastic (at the signal position).

Modification of the shorter end

1. Use a needle to free-up the Red and Orange wires from the plastic.
2. Then plug the Red wire from the middle to the previous position of the Orange.
3. Plug the Orange wire to a separate servo plastic (at signal position).