Difference between revisions of "Translations:GeoLink Troubleshooting/17/en"
From Spirit System Manual
(Importing a new version from external source) |
(Importing a new version from external source) |
||
Line 1: | Line 1: | ||
If you can see 3 series of fast flashing (followed by fast erratic blinks) after power up of the GeoLink then the module is in so called Calibration process. | If you can see 3 series of fast flashing (followed by fast erratic blinks) after power up of the GeoLink then the module is in so called Calibration process. | ||
− | This process can be invoked by pilot through Spirit Settings and must be finished according [http://manual.spirit-system.com/index.php?title=GeoLink_Configuration#Compass_Calibration instructions]. | + | This process can be invoked by pilot through the Spirit Settings software and must be finished according [http://manual.spirit-system.com/index.php?title=GeoLink_Configuration#Compass_Calibration instructions]. |
− | Until finished the GeoLink will be inoperable. | + | Until finished the GeoLink will be inoperable. Spirit Settings will display '''Not connected''' message until the calibration is finished. |
Latest revision as of 21:09, 22 July 2019
If you can see 3 series of fast flashing (followed by fast erratic blinks) after power up of the GeoLink then the module is in so called Calibration process. This process can be invoked by pilot through the Spirit Settings software and must be finished according instructions. Until finished the GeoLink will be inoperable. Spirit Settings will display Not connected message until the calibration is finished.