Difference between revisions of "HobbyWing Telemetry"

From Spirit System Manual
Jump to: navigation, search
(Marked this version for translation)
 
(28 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
<languages />
 +
 +
<translate><!--T:1-->
 
HobbyWing Platinum V4 ESC has telemetry feature built-in in the Programming port. This allows telemetry data transmission to the unit.
 
HobbyWing Platinum V4 ESC has telemetry feature built-in in the Programming port. This allows telemetry data transmission to the unit.
−
To allow the ESC telemetry, it is necessary to have updated ESC as the older firmware versions were not supporting it.
+
To allow the ESC telemetry, it is necessary to have updated ESC firmware to a recent, non VBar firmware.</translate>
−
 
+
−
== Telemetry Cable ==
+
== <translate><!--T:2-->
−
To allow the telemetry data transmission special cable is required. This cable is available in our [http://store.spirit-system.com/en/accessories/34-telemuni-cable.html Eshop].
+
Telemetry Cable</translate> ==
 +
<translate><!--T:3-->
 +
To allow the telemetry data transmission the '''Telem UNI cable''' is required. This cable is available in our [http://store.spirit-system.com/en/accessories/34-telemuni-cable.html Eshop].</translate>
  
 
[[File:telemuni.png|280px]]
 
[[File:telemuni.png|280px]]
  
−
== Interfacing ==
+
{{Quote|<translate><!--T:31-->
 +
We do not recommend to make this cable at home since improper connection will cause permanent damage of the unit.
 +
The Red wire must be internally disconnected always!</translate>}}
 +
 
 +
== <translate><!--T:4-->
 +
Interfacing</translate> ==
 +
 
 +
<translate><!--T:5-->
 +
Connect the Telemetry cable to the primary Spektrum satellite port ('''SAT1''') in the unit - apply for Spirit 2, Spirit RS, Spirit Pro, Spirit GT, Spirit GTR.
  
−
Connect the Telemetry cable to the primary Spektrum satellite port in the unit. Smaller Spirit units will utilize the one native Spektrum satellite port.
+
<!--T:29-->
 +
Smaller Spirit units will utilize the one native Spektrum satellite port ('''SAT''') - apply for μSpirit and Spirit 1.</translate>
  
 
[[File:unit-telemuni.jpg|350px]]
 
[[File:unit-telemuni.jpg|350px]]
  
−
Servo connector of the Telem UNI cable should be connected to the ESC - programming port (P).
+
<translate><!--T:6-->
 +
Servo connector of the Telem UNI cable should be connected to the ESC - programming port (P).</translate>
  
 
[[File:esc-hw.jpg|350px]]
 
[[File:esc-hw.jpg|350px]]
Line 19: Line 34:
 
== Spirit Settings ==
 
== Spirit Settings ==
  
−
Power up the ESC and start the Spirit Settings as usually.
+
<translate><!--T:7-->
 +
Power up the ESC and start the Spirit Settings as usually.</translate>
  
−
=== Telemetry activation ===
+
=== <translate><!--T:8-->
 +
Telemetry activation</translate> ===
  
−
As the last step you have to set the ESC Telemetry in the Spirit Settings software.
+
<translate><!--T:9-->
 +
As the last step you have to set the ESC Telemetry in the Spirit Settings software.</translate>
  
−
Go to the '''Advanced/Telemetry settings''' and set the '''HobbyWing Platinum V4''' option.
+
<translate><!--T:10-->
 +
Go to the '''Advanced/Telemetry settings''' and set the '''HobbyWing Platinum V4''' option.</translate>
  
 
[[File:esc-telem-hw.png|400px]]
 
[[File:esc-telem-hw.png|400px]]
  
−
Then close the window and save the settings ''(CTRL+S)''. Finally, reconnect battery from the ESC.
+
<translate><!--T:11-->
 +
Then close the window and save the settings ''(CTRL+S)''. Finally, reconnect battery from the ESC.</translate>
  
−
From this moment, everything should work.
+
<translate><!--T:12-->
 +
From this moment, everything should work.</translate>
  
−
== Displaying telemetry data ==
+
== <translate><!--T:13-->
 +
Displaying telemetry data</translate> ==
  
−
You can display telemetry data directly in your radio from now.
+
<translate><!--T:14-->
 +
You can display telemetry data directly in your radio from now.</translate>
  
−
How to display the data is described in the integration guides:
+
<translate><!--T:15-->
−
*[[Jeti_Integration|JETI Duplex]]
+
How to display the data is described in the integration guides:</translate>
−
*[[OpenTX_Integration|FrSky Taranis & Horus]]
+
*[[<translate><!--T:16-->
−
*[[Hott_Integration|Graupner HoTT]]
+
Jeti_Integration</translate>|JETI Duplex]]
 +
*[[<translate><!--T:17-->
 +
OpenTX_Integration</translate>|OpenTX]]
 +
*[[<translate><!--T:33-->
 +
EthOS</translate>|FrSky EthOS]]
 +
*[[<translate><!--T:18-->
 +
Hott_Integration</translate>|Graupner HoTT]]
 +
*[[<translate><!--T:27-->
 +
Spektrum_Integration</translate>|Spektrum Integration]]
 +
*[[<translate><!--T:28-->
 +
Futaba Telemetry</translate>|Futaba Telemetry]]
  
−
== Supported models ==
+
<p></p>
 +
{{Info|[[File:Info.png|18px|]] <translate><!--T:30-->
 +
HobbyWing ESC can transmit Current and Consumed Capacity only when there is a load. Without main blades it will show zero value.</translate>.}}
 +
<p></p>
 +
 
 +
{{Quote|<translate><!--T:32-->
 +
Please update your ESC firmware to the most recent firmware, but one which has not "VBar" in the name. Otherwise all telemetry values will be Zero.</translate>}}
 +
 
 +
== <translate><!--T:19-->
 +
Supported models</translate> ==
  
 
{| class="servolist"  
 
{| class="servolist"  
 
!  
 
!  
−
Model
+
<translate><!--T:20-->
 +
Model</translate>
 
!  
 
!  
−
Battery Voltage
+
<translate><!--T:21-->
 +
Battery Voltage</translate>
 
!  
 
!  
−
Battery Current
+
<translate><!--T:22-->
 +
Battery Current</translate>
 
!  
 
!  
−
Consumed Capacity
+
<translate><!--T:23-->
 +
Consumed Capacity</translate>
 
!  
 
!  
−
ESC Temperature
+
<translate><!--T:24-->
 +
ESC Temperature</translate>
 +
!
 +
<translate><!--T:26-->
 +
RPM</translate>
 +
|-
 +
| Platinum 25A V4
 +
| style="text-align:center;" |✔
 +
| style="text-align:center;" |x
 +
| style="text-align:center;" |x
 +
| style="text-align:center;" |✔
 +
| style="text-align:center;" |✔
 +
|-
 +
| Platinum 40A V4
 +
| style="text-align:center;" |✔
 +
| style="text-align:center;" |x
 +
| style="text-align:center;" |x
 +
| style="text-align:center;" |✔
 +
| style="text-align:center;" |✔
 
|-
 
|-
 
| Platinum 60A V4
 
| Platinum 60A V4
Line 60: Line 124:
 
| style="text-align:center;" |x
 
| style="text-align:center;" |x
 
| style="text-align:center;" |x
 
| style="text-align:center;" |x
 +
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
|-
 
|-
 
| Platinum 80A V4
 
| Platinum 80A V4
 +
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
Line 69: Line 135:
 
|-
 
|-
 
| Platinum 120A V4
 
| Platinum 120A V4
 +
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
Line 75: Line 142:
 
|-
 
|-
 
| Platinum HV 130A V4
 
| Platinum HV 130A V4
 +
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
Line 81: Line 149:
 
|-
 
|-
 
| Platinum HV 130A OPTO V4
 
| Platinum HV 130A OPTO V4
 +
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
Line 87: Line 156:
 
|-
 
|-
 
| Platinum HV 160A V4
 
| Platinum HV 160A V4
 +
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
Line 93: Line 163:
 
|-
 
|-
 
| Platinum HV 200A OPTO V4
 
| Platinum HV 200A OPTO V4
 +
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
Line 98: Line 169:
 
| style="text-align:center;" |✔
 
| style="text-align:center;" |✔
 
|}
 
|}
 +
<p></p>
 +
{{Info|[[File:Info.png]] <translate><!--T:25-->
 +
Consumed Capacity is calculated from the Current Consumption.</translate>}}

Latest revision as of 10:24, 17 November 2023

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎magyar • ‎italiano • ‎русский

HobbyWing Platinum V4 ESC has telemetry feature built-in in the Programming port. This allows telemetry data transmission to the unit. To allow the ESC telemetry, it is necessary to have updated ESC firmware to a recent, non VBar firmware.

1 Telemetry Cable

To allow the telemetry data transmission the Telem UNI cable is required. This cable is available in our Eshop.

Telemuni.png

Warning.png We do not recommend to make this cable at home since improper connection will cause permanent damage of the unit. The Red wire must be internally disconnected always!

2 Interfacing

Connect the Telemetry cable to the primary Spektrum satellite port (SAT1) in the unit - apply for Spirit 2, Spirit RS, Spirit Pro, Spirit GT, Spirit GTR.

Smaller Spirit units will utilize the one native Spektrum satellite port (SAT) - apply for μSpirit and Spirit 1.

Unit-telemuni.jpg

Servo connector of the Telem UNI cable should be connected to the ESC - programming port (P).

Esc-hw.jpg

3 Spirit Settings

Power up the ESC and start the Spirit Settings as usually.

3.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the HobbyWing Platinum V4 option.

Esc-telem-hw.png

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

4 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

Info.png HobbyWing ESC can transmit Current and Consumed Capacity only when there is a load. Without main blades it will show zero value..

Warning.png Please update your ESC firmware to the most recent firmware, but one which has not "VBar" in the name. Otherwise all telemetry values will be Zero.

5 Supported models

Model

Battery Voltage

Battery Current

Consumed Capacity

ESC Temperature

RPM

Platinum 25A V4 ✔ x x ✔ ✔
Platinum 40A V4 ✔ x x ✔ ✔
Platinum 60A V4 ✔ x x ✔ ✔
Platinum 80A V4 ✔ ✔ ✔ ✔ ✔
Platinum 120A V4 ✔ ✔ ✔ ✔ ✔
Platinum HV 130A V4 ✔ ✔ ✔ ✔ ✔
Platinum HV 130A OPTO V4 ✔ ✔ ✔ ✔ ✔
Platinum HV 160A V4 ✔ ✔ ✔ ✔ ✔
Platinum HV 200A OPTO V4 ✔ ✔ ✔ ✔ ✔

Info.png Consumed Capacity is calculated from the Current Consumption.

Retrieved from "https://manual.spirit-system.com/index.php?title=HobbyWing_Telemetry&oldid=52072"