Első repülés

Ha biztos benne, hogy az egységet helyesen állította be, akkor készen áll az első repülésre.

Javasoljuk, hogy a Gyro Gain értékét 50% -ra állítsa az első repüléshez. Ez mérsékelt erősítéssel állítja be a Fej tartását (Head-Lock) giroszkóp üzemmódot.

1 REPÜLÉS ELŐTTI ELLENŐRZÉS

1. Turn on the transmitter and connect the battery to the model.
2. Wait for the initialization, the swashplate jumps.
3. Tilt the model, ensure the swashplate is compensating in the correct direction on all axes.
4. Move the tail boom in any direction, the tail slider/rudder blades should compensate in the opposite direction.
5. Check that input from the transmitter sticks moves the swashplate and tail in the correct directions.
6. Place the model on a flat surface, use the transmitter sticks to level the swashplate if it isn't already, the tail slider should be approximately in the center of its travel range.

If you encounter a problem or something appears wrong at this point, do not try to take off!

2 TAKEOFF

1. Spool up the main rotor to the desired speed - we recommend to start with a slightly lower RPM.
2. Slowly increase the collective pitch from zero.
3. Try to steer the rudder and check whether it has sufficient gain and stop performance is good.
4. If control is not very precise, slowly add cyclic and rudder gain as needed.

3 TUNING

Once you have finished the first flight and you want to achieve the optimal settings, please check the Tuning Guide.