Spektrum PWM connection

This page is a translated version of the page Spektrum PWM connection and the translation is 100% complete.

---

This table is describing connection of the Spektrum AR610 receiver. Because labels are same between other receivers you can use it also for other AR receivers.

PWM Wiring

UNIT	RECEIVER
RUD	RUDD
AUX	GEAR
ELE/PIT/AIL	ORANGE wire to AILE RED wire to AUX 1 BROWN wire to ELEV

Servo connectors are connected always with Orange wire closer to the labels (in the receiver and unit as well).

Special cable which ends with 3 servo connectors must be connected in the way, that these wires are always closer to the port labels.

• ESC should be connected to the THRO port.

• If External BEC is used, you can connect it to a free port in the receiver.