Difference between revisions of "Spirit Settings under Linux"
From Spirit System Manual
(Created page with "== Spirit Settings under Linux == === Installation === # Download and extract archive from http://spirit-system.com page. File:mint-1.jpg # Go to the extracted director...") |
|||
| Line 1: | Line 1: | ||
| − | + | == Installation == | |
| − | + | ||
| − | + | ||
# Download and extract archive from http://spirit-system.com page. | # Download and extract archive from http://spirit-system.com page. | ||
| Line 11: | Line 9: | ||
# Close the app and connect the USB interface to the computer. | # Close the app and connect the USB interface to the computer. | ||
| − | + | == Usage == | |
# Whenever you need, start the app by clicking the '''settings.sh''' file. The USB interface must be plugged in your computer before starting. | # Whenever you need, start the app by clicking the '''settings.sh''' file. The USB interface must be plugged in your computer before starting. | ||
If everything is OK, you will see a Device in the Connection tab. | If everything is OK, you will see a Device in the Connection tab. | ||
Revision as of 11:25, 5 March 2018
1 Installation
- Download and extract archive from http://spirit-system.com page.
- Go to the extracted directory with Spirit Settings software and click at the settings.sh.
- Choose Open in Terminal selection.
- Enter your user password to create UDEV rule. (to allow access for the USB interface)
- Close the app and connect the USB interface to the computer.
2 Usage
- Whenever you need, start the app by clicking the settings.sh file. The USB interface must be plugged in your computer before starting.
If everything is OK, you will see a Device in the Connection tab.
