Translations:Configuration/12/en
From Spirit System Manual
Revision as of 11:16, 16 September 2016 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
If you have already attached the USB interface to your computer, next connect the interface cable to the SYS port of the Spirit FBL unit. The Spirit FBL unit can not be powered from the USB cable/SYS port so it is necessary to power it from either the receiver, a BEC or an external battery pack. The RUD and AUX ports are used to power the Spirit FBL unit and if using a BEC or battery pack it is suggested to connect to these ports with a voltage between 3V and 15V. The middle wire must be the positive voltage connection.
