View source for SpiritRS Telemetry/cs

Jednotky Spirit RS nabízí 2 nezávislé porty pro telemetrická čidla JETI model.
Tyto čidla jsou zcela kompatibilní a mohou být připojena stejným způsobem, jako je tomu u řady přijímačů REX.

If you will need to connect more sensors, you can use '''JETI model EXPANDER'''. So you are able to virtually connect up to 8 telemetry sensors at the same time.

Available telemetry ports:
* '''E1'''
* '''EXT'''

By default both are configured as JETIBOX/Sensor which mean you do not have to do any other adjustments, just connect the sensors.

== Telemetry Sensor Wiring ==

=== E1 port ===

Connect Sensor or Expander cable directly without any change.

[[File:spiritrs-e1.jpg|class=smallwidth]]

=== EXT port ===

Connect Sensor or Expander cable in so that RED/BROWN wires are at the AUX port (or any other free powering port) and ORANGE wire at the EXT pin.
In case of lack of free ports, please use an Y-cable.

{{Info|[[File:Info.png]] Original connector must be modified so that two servo connectors are used. You can use JETI integration cable for this purpose.}}
<p></p>

[[File:spiritrs-ext.jpg|class=smallwidth]]

== Telemetry Sensor Data ==

You can set display Sensor Data at the Main screen in the '''Displayed Telemetry''' menu.

[[File:jeti-telemset.png]] [[File:jeti-telemshow.png]]

== Spirit Telemetry ==

Besides JETI model sensors you can also utilize the [[ESC telemetry|ESC Telemetry]] and Spirit telemetry variables.

So that you can interface your ESC and display telemetry data such as Battery Voltage, Current, Consumed Capacity, Temperature, RPM.

=== List of supported ESCs ===
*[[Castle Telemetry|Castle Creations Phoenix & Talon]]
*[[HobbyWing Telemetry|HobbyWing Platinum V4]]
*[[Scorpion Telemetry|Scorpion Tribunus]]
*[[Kontronik Telemetry|Kontronik KOSMIK & JIVE PRO]]
*[[Jive Telemetry|Kontronik JIVE]]
*[[YGE Telemetry|YGE LVT/HVT]]
*[[TelMe Telemetry|Kontronik TelMe Telemetry]]