View source for Stratos 200

Spirit units are fully compatible with Stratos 200 and will offer out of the box experience with the latest Spirit 4.0.4 firmware and software.
For the best performance we recommend Spirit 3, Spirit W3, Spirit GT, Spirit GTR or Spirit W1 units. These have full support for '''DShot300 protocol'''.

==Wiring==

You can wire Stratos according following scheme:

*'''CH1''' - S2 Servo
*'''CH2''' - S1 Servo
*'''CH3''' - S3 Servo

*'''PIT''' (Center pin) - Green cable for RPM readings
*'''SAT1''' - ESC Telemetry cable - [https://store.spirit-system.com/en/esc-telemetry/33-jstservo-cable.html JST-Servo] adapter required. Signal wire must be connected closer to the main pin headers.

===Spirit 3, Spirit GT===
*'''AUX2''' - Blue cable (Tail Motor)
*'''AUX1''' - ESC cable (Main Motor)

===Spirit W1, Spirit W3, Spirit GTR===
*'''AUX''' - Blue cable (Tail Motor)
*'''THR''' - ESC cable (Main Motor)

==Starting==

#First please install the latest PC software 4.0.4 from our [https://spirit-system.com/download.php Download section].
#Then flash the Firmware '''4.0.4-STRATOS''' from the Firmware List.

[[File:StratosFirmware.png|550px]]

==Setup Wizard==

After flashing you can start the '''Setup Wizard''' that include all required settings.

[[File:StratosWizard.png|550px]]