View source for Scorpion Telemetry

<languages />

<translate><!--T:1-->
Scorpion Tribunus ESC has telemetry feature built-in in the Programming port. This allows telemetry data transmission to the unit.</translate>

== <translate><!--T:2-->
ESC configuration</translate> ==

<translate><!--T:3-->
To enable the ESC telemetry, it is necessary to set the '''Unsolicited''' telemetry mode in your ESC.
With other modes the telemetry will not work.</translate>
<translate><!--T:4-->
Change '''Communication protocol''' to '''Unsc Telem''' in the [http://www.scorpionsystem.com/files/download/Scorpions_Heli_ESC_1.02_log.msi Scorpion Tribunus software].</translate>
<translate><!--T:5-->
For this purpose '''Scorpion V link II Cable''' is needed.</translate>

[[File:sw-tribunus.png|750px]]

== <translate><!--T:6-->
Telemetry Cable</translate> ==
<translate><!--T:7-->
To allow the telemetry data transmission the '''Telem UNI cable''' is required. This cable is available in our [http://store.spirit-system.com/en/accessories/34-telemuni-cable.html Eshop].</translate>

[[File:telemuni.png|280px]]

== <translate><!--T:8-->
Interfacing</translate> ==

<translate><!--T:9-->
Connect the Telemetry cable to the primary Spektrum satellite port in the unit. Smaller Spirit units will utilize the one native Spektrum satellite port.</translate>

[[File:unit-telemuni.jpg|350px]]

<translate><!--T:10-->
Servo connector of the Telem UNI cable should be connected to the ESC - programming port.</translate>

[[File:esc-scorpion.jpg|350px]]

== Spirit Settings ==

<translate><!--T:11-->
Power up the ESC and start the Spirit Settings as usually.</translate>

=== <translate><!--T:12-->
Telemetry activation</translate> ===

<translate><!--T:13-->
As the last step you have to set the ESC Telemetry in the Spirit Settings software.</translate>

<translate><!--T:14-->
Go to the '''Advanced/Telemetry settings''' and set the '''Scorpion Tribunus''' option.</translate>

[[File:esc-telem-sc.png|400px]]

<translate><!--T:15-->
Then close the window and save the settings ''(CTRL+S)''. Finally, reconnect battery from the ESC.</translate>

<translate><!--T:16-->
From this moment, everything should work.</translate>

== <translate><!--T:17-->
Displaying telemetry data</translate> ==

<translate><!--T:18-->
You can display telemetry data directly in your radio from now.</translate>

<translate><!--T:19-->
How to display the data is described in the integration guides:</translate>
*[[<translate><!--T:20-->
Jeti_Integration</translate>|JETI Duplex]]
*[[<translate><!--T:21-->
OpenTX_Integration</translate>|OpenTX]]
*[[<translate><!--T:31-->
EthOS</translate>|FrSky EthOS]]
*[[<translate><!--T:22-->
Hott_Integration</translate>|Graupner HoTT]]
*[[<translate><!--T:32-->
Spektrum_Integration</translate>|Spektrum Integration]]
*[[<translate><!--T:33-->
Futaba Telemetry</translate>|Futaba Telemetry]]

== <translate><!--T:23-->
Supported models</translate> ==

{| class="servolist" 
! 
<translate><!--T:24-->
Model</translate>
! 
<translate><!--T:25-->
Battery Voltage</translate>
! 
<translate><!--T:26-->
Battery Current</translate>
! 
<translate><!--T:27-->
BEC Voltage</translate>
! 
<translate><!--T:28-->
Consumed Capacity</translate>
! 
<translate><!--T:29-->
ESC Temperature</translate>
! 
<translate><!--T:30-->
RPM</translate>
|-
| Scorpion Tribunus 06-120A (SBEC)
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
|-
| Scorpion Tribunus 06-120A (OPTO)
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
|-
| Scorpion Tribunus 14-200A (SBEC)
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
| style="text-align:center;" |✔
|-
|}