Difference between revisions of "Futaba PPM"
From Spirit System Manual
(Created page with "In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout. == Software Channel Mapping == S...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout. | In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout. | ||
| + | |||
| + | These receivers are labelled with ''SP'' mark. | ||
== Software Channel Mapping == | == Software Channel Mapping == | ||
| Line 5: | Line 7: | ||
Set the channel mapping in the ''General/Channels'' window to: | Set the channel mapping in the ''General/Channels'' window to: | ||
| − | Trottle: Channel 1 | + | *Trottle: Channel 1 |
| − | Aileron: Channel 2 | + | *Aileron: Channel 2 |
| − | Elevator: Channel 3 | + | *Elevator: Channel 3 |
| − | Rudder: Channel 6 | + | *Rudder: Channel 6 |
| − | Gyro Gain: Channel 4 | + | *Gyro Gain: Channel 4 |
| − | Pitch: Channel 5 | + | *Pitch: Channel 5 |
| − | Bank: Channel 7 (optional) | + | *Bank: Channel 7 '''(optional)''' |
== Transmitter Channel Mapping == | == Transmitter Channel Mapping == | ||
| − | Throttle: Channel 1 | + | *Throttle: Channel 1 |
| − | Aileron: Channel 2 | + | *Aileron: Channel 2 |
| − | Elevator: Channel 3 | + | *Elevator: Channel 3 |
| − | Rudder: Channel 4 | + | *Rudder: Channel 4 |
| − | Gyro Gain: Channel 5 | + | *Gyro Gain: Channel 5 |
| − | Pitch: Channel 6 | + | *Pitch: Channel 6 |
| − | Bank: Channel 7 (optional) | + | *Bank: Channel 7 '''(optional)''' |
Latest revision as of 09:12, 21 September 2017
In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout.
These receivers are labelled with SP mark.
1 Software Channel Mapping
Set the channel mapping in the General/Channels window to:
- Trottle: Channel 1
- Aileron: Channel 2
- Elevator: Channel 3
- Rudder: Channel 6
- Gyro Gain: Channel 4
- Pitch: Channel 5
- Bank: Channel 7 (optional)
2 Transmitter Channel Mapping
- Throttle: Channel 1
- Aileron: Channel 2
- Elevator: Channel 3
- Rudder: Channel 4
- Gyro Gain: Channel 5
- Pitch: Channel 6
- Bank: Channel 7 (optional)
