Difference between revisions of "Translations:Wiring/9/hu"

From Spirit System Manual
Jump to: navigation, search
(Created page with "Csatlakoztassa az oldalkormány szervóját a Spirit egység CH4 portjához. Ha szabványos vevőt is használ, akkor a GEAR (vagy AUX) eszközt a vevőegységből a Spirit eg...")
 
 
Line 1: Line 1:
Csatlakoztassa az oldalkormány szervóját a Spirit egység CH4 portjához. Ha szabványos vevőt is használ, akkor a GEAR (vagy AUX) eszközt a vevőegységből a Spirit egység AUX portjához kell csatlakoztatnia. Ezenkívül csatlakoztatnia kell a vevő RUD portját a Spirit egység RUD portjához.
+
Csatlakoztassa az oldalkormány szervóját a Spirit egység CH4 portjához. Ha szabványos vevőt használ, akkor a GEAR (vagy AUX) aljzatot a vevőnél, a Spirit egység AUX aljzatához kell csatlakoztatni. Ezenkívül csatlakoztatnia kell a vevő RUD portját a Spirit egység RUD portjához.

Latest revision as of 19:24, 31 August 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Wiring)
Connect the rudder servo to the ''CH4'' port of the Spirit unit.
If you also use a standard receiver, you will need to connect GEAR (or AUX) from your receiver to the AUX port on the Spirit unit.
Also, you will need to connect your receiver RUD port to the RUD port on the Spirit unit.
TranslationCsatlakoztassa az oldalkormány szervóját a Spirit egység CH4 portjához. Ha szabványos vevőt használ, akkor a GEAR (vagy AUX) aljzatot a vevőnél, a Spirit egység AUX aljzatához kell csatlakoztatni. Ezenkívül csatlakoztatnia kell a vevő RUD portját a Spirit egység RUD portjához.

Csatlakoztassa az oldalkormány szervóját a Spirit egység CH4 portjához. Ha szabványos vevőt használ, akkor a GEAR (vagy AUX) aljzatot a vevőnél, a Spirit egység AUX aljzatához kell csatlakoztatni. Ezenkívül csatlakoztatnia kell a vevő RUD portját a Spirit egység RUD portjához.