Difference between revisions of "Translations:Futaba Telemetry/78/en"

From Spirit System Manual
Jump to: navigation, search
(Importing a new version from external source)
 
(Importing a new version from external source)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
−
'''Modification of the shorter end'''
+
'''Modification of the longer end'''
−
#Use a needle to free-up the Red and Orange wires from the plastic.
+
#Use a needle to free-up the Red wire from the plastic.
−
#Then plug the Red wire from the middle to the previous position of the Orange.
+
#Then plug the Red wire from the middle to a separate servo plastic (at the signal position).
−
#Plug the Orange wire to a separate servo plastic (at signal position).
+

Latest revision as of 16:00, 27 August 2017

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Futaba Telemetry)
'''Modification of the longer end'''
#Use a needle to free-up the Red wire from the plastic.
#Then plug the Red wire from the middle to a separate servo plastic (at the signal position).
Translation'''Modification of the longer end'''
#Use a needle to free-up the Red wire from the plastic.
#Then plug the Red wire from the middle to a separate servo plastic (at the signal position).

Modification of the longer end

  1. Use a needle to free-up the Red wire from the plastic.
  2. Then plug the Red wire from the middle to a separate servo plastic (at the signal position).
Retrieved from "https://manual.spirit-system.com/index.php?title=Translations:Futaba_Telemetry/78/en&oldid=17857"