Difference between revisions of "SpiritRS Telemetry"
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | <translate>Spirit RS | + | <translate><!--T:1--> |
| + | Spirit RS and Spirit GTR are equipped with 2 separate inputs for JETI model sensors. | ||
These sensors are completely compatible and can be used in the same way as with REX-line receivers. | These sensors are completely compatible and can be used in the same way as with REX-line receivers. | ||
| + | <!--T:2--> | ||
If you will need to connect more sensors, you can use '''JETI model EXPANDER'''. So you are able to virtually connect up to 8 telemetry sensors at the same time.</translate> | If you will need to connect more sensors, you can use '''JETI model EXPANDER'''. So you are able to virtually connect up to 8 telemetry sensors at the same time.</translate> | ||
| − | <translate>Available telemetry ports:</translate> | + | <translate><!--T:3--> |
| + | Available telemetry ports:</translate> | ||
* '''E1''' | * '''E1''' | ||
* '''EXT''' | * '''EXT''' | ||
| − | <translate>By default both are configured as JETIBOX/Sensor which mean you do not have to do any other adjustments, just connect the sensors.</translate> | + | <translate><!--T:4--> |
| + | By default both are configured as JETIBOX/Sensor which mean you do not have to do any other adjustments, just connect the sensors.</translate> | ||
| − | |||
| − | + | {{Quote| <translate><!--T:24--> | |
| + | Spirit RS and GTR are equipped also with E2 pin at EXT/RPM/E2 port. In the future this pin can be used in case Spirit RS, GTR will act as a standalone receiver. '''No sensor for Spirit RS, GTR can be connected to E2 pin.'''</translate>}} | ||
| + | <p></p> | ||
| − | <translate>Connect Sensor or Expander cable directly without any change.</translate> | + | == <translate><!--T:5--> |
| + | Telemetry Sensor Wiring</translate> == | ||
| + | |||
| + | === <translate><!--T:6--> | ||
| + | E1 port</translate> === | ||
| + | |||
| + | <translate><!--T:7--> | ||
| + | Connect Sensor or Expander cable directly without any change.</translate> | ||
[[File:spiritrs-e1.jpg|class=smallwidth]] | [[File:spiritrs-e1.jpg|class=smallwidth]] | ||
| − | + | <translate><!--T:25--> | |
| + | This port can be used for a sensors that require JETIBOX/Sensor or EXBUS configuration. Spirit RS, GTR can be also used as a standalone receiver while using this port.</translate> | ||
| − | <translate>Connect Sensor or Expander cable in so that RED/BROWN wires are at the AUX port (or any other free powering port) and ORANGE wire at the EXT pin. | + | === <translate><!--T:8--> |
| + | EXT port</translate> === | ||
| + | |||
| + | <translate><!--T:9--> | ||
| + | Connect Sensor or Expander cable in so that RED/BROWN wires are at the AUX port (or any other free powering port) and ORANGE wire at the EXT pin. | ||
In case of lack of free ports, please use an Y-cable.</translate> | In case of lack of free ports, please use an Y-cable.</translate> | ||
| − | {{Info|[[File:Info.png]] <translate>Original connector must be modified so that two servo connectors are used. You can use JETI integration cable for this purpose.</translate>}} | + | {{Info|[[File:Info.png]] <translate><!--T:10--> |
| + | Original connector must be modified so that two servo connectors are used. You can use JETI integration cable for this purpose.</translate>}} | ||
<p></p> | <p></p> | ||
[[File:spiritrs-ext.jpg|class=smallwidth]] | [[File:spiritrs-ext.jpg|class=smallwidth]] | ||
| − | == <translate>Telemetry Sensor Data</translate> == | + | <translate><!--T:26--> |
| + | This port can be used for a sensors that require JETIBOX/Sensor configuration. EXBUS settings is not possible there.</translate> | ||
| + | |||
| + | == <translate><!--T:11--> | ||
| + | Telemetry Sensor Data</translate> == | ||
| − | <translate>You can set display Sensor Data at the Main screen in the '''Displayed Telemetry''' menu.</translate> | + | <translate><!--T:12--> |
| + | You can set display Sensor Data at the Main screen in the '''Displayed Telemetry''' menu.</translate> | ||
[[File:jeti-telemset.png]] [[File:jeti-telemshow.png]] | [[File:jeti-telemset.png]] [[File:jeti-telemshow.png]] | ||
| − | == <translate>Spirit Telemetry</translate> == | + | == <translate><!--T:13--> |
| + | Spirit Telemetry</translate> == | ||
| − | <translate>Besides JETI model sensors you can also utilize the [[ESC telemetry|ESC Telemetry]] and Spirit telemetry variables. | + | <translate><!--T:14--> |
| + | Besides JETI model sensors you can also utilize the [[ESC telemetry|ESC Telemetry]] and Spirit telemetry variables. | ||
| + | <!--T:15--> | ||
So that you can interface your ESC and display telemetry data such as Battery Voltage, Current, Consumed Capacity, Temperature, RPM.</translate> | So that you can interface your ESC and display telemetry data such as Battery Voltage, Current, Consumed Capacity, Temperature, RPM.</translate> | ||
| − | === <translate>List of supported ESCs</translate> === | + | === <translate><!--T:16--> |
| − | *[[<translate>Castle Telemetry</translate>|Castle Creations Phoenix & Talon]] | + | List of supported ESCs</translate> === |
| − | *[[<translate>HobbyWing Telemetry</translate>|HobbyWing Platinum V4]] | + | *[[<translate><!--T:17--> |
| − | *[[<translate>Scorpion Telemetry</translate>|Scorpion Tribunus]] | + | Castle Telemetry</translate>|Castle Creations Phoenix & Talon]] |
| − | *[[<translate>Kontronik Telemetry</translate>|Kontronik KOSMIK & JIVE PRO]] | + | *[[<translate><!--T:18--> |
| − | *[[<translate>Jive Telemetry</translate>|Kontronik JIVE]] | + | HobbyWing Telemetry</translate>|HobbyWing Platinum V4]] |
| − | *[[<translate>YGE Telemetry</translate>|YGE LVT/HVT]] | + | *[[<translate><!--T:19--> |
| − | *[[<translate>TelMe Telemetry</translate>|Kontronik TelMe Telemetry]] | + | Scorpion Telemetry</translate>|Scorpion Tribunus]] |
| + | *[[<translate><!--T:20--> | ||
| + | Kontronik Telemetry</translate>|Kontronik KOSMIK & JIVE PRO]] | ||
| + | *[[<translate><!--T:21--> | ||
| + | Jive Telemetry</translate>|Kontronik JIVE]] | ||
| + | *[[<translate><!--T:22--> | ||
| + | YGE Telemetry</translate>|YGE LVT/HVT]] | ||
| + | *[[<translate><!--T:23--> | ||
| + | TelMe Telemetry</translate>|Kontronik TelMe Telemetry]] | ||
Latest revision as of 10:21, 24 January 2023
Spirit RS and Spirit GTR are equipped with 2 separate inputs for JETI model sensors. These sensors are completely compatible and can be used in the same way as with REX-line receivers.
If you will need to connect more sensors, you can use JETI model EXPANDER. So you are able to virtually connect up to 8 telemetry sensors at the same time.
Available telemetry ports:
- E1
- EXT
By default both are configured as JETIBOX/Sensor which mean you do not have to do any other adjustments, just connect the sensors.
Spirit RS and GTR are equipped also with E2 pin at EXT/RPM/E2 port. In the future this pin can be used in case Spirit RS, GTR will act as a standalone receiver. No sensor for Spirit RS, GTR can be connected to E2 pin.
Contents
1 Telemetry Sensor Wiring
1.1 E1 port
Connect Sensor or Expander cable directly without any change.
This port can be used for a sensors that require JETIBOX/Sensor or EXBUS configuration. Spirit RS, GTR can be also used as a standalone receiver while using this port.
1.2 EXT port
Connect Sensor or Expander cable in so that RED/BROWN wires are at the AUX port (or any other free powering port) and ORANGE wire at the EXT pin. In case of lack of free ports, please use an Y-cable.
Original connector must be modified so that two servo connectors are used. You can use JETI integration cable for this purpose.
This port can be used for a sensors that require JETIBOX/Sensor configuration. EXBUS settings is not possible there.
2 Telemetry Sensor Data
You can set display Sensor Data at the Main screen in the Displayed Telemetry menu.
3 Spirit Telemetry
Besides JETI model sensors you can also utilize the ESC Telemetry and Spirit telemetry variables.
So that you can interface your ESC and display telemetry data such as Battery Voltage, Current, Consumed Capacity, Temperature, RPM.
