Difference between revisions of "Translations:Configuration/67/en"

From Spirit System Manual
Jump to: navigation, search
(Importing a new version from external source)
 
(Importing a new version from external source)
 
(One intermediate revision by one other user not shown)
(No difference)

Latest revision as of 10:53, 19 September 2016

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Configuration)
This functionality is enabled only when the configuration software is not connected. This will prevent from a possible collisions.
As soon as the software is disconnected, selected parameter is configured by the channel value.
In case that the software is started again, it will keep value from realtime tuning in it's memory.
However, with opened software policy described above will be applied again (Realtime tuning is inactive and value will be intact even if channel is changed).
TranslationThis functionality is enabled only when the configuration software is not connected. This will prevent from a possible collisions.
As soon as the software is disconnected, selected parameter is configured by the channel value.
In case that the software is started again, it will keep value from realtime tuning in it's memory.
However, with opened software policy described above will be applied again (Realtime tuning is inactive and value will be intact even if channel is changed).

This functionality is enabled only when the configuration software is not connected. This will prevent from a possible collisions. As soon as the software is disconnected, selected parameter is configured by the channel value. In case that the software is started again, it will keep value from realtime tuning in it's memory. However, with opened software policy described above will be applied again (Realtime tuning is inactive and value will be intact even if channel is changed).