Difference between revisions of "Translations:Spirit Settings under Windows/15/en"

From Spirit System Manual
Jump to: navigation, search
(Importing a new version from external source)
 
Line 1: Line 1:
−
Se vedi il messaggio '''Scanning devices''' senza modifiche per più di 10 secondi, riavvia il computer e spegni il modulo Bluetooth (se abilitato sul tuo computer).
+
If you can see '''Scanning devices''' message with no change over more than 10 seconds reboot your computer and turn off the Bluetooth module (if enabled on your computer).
−
Quindi avvia di nuovo le impostazioni dello spirito: questa volta dovrebbe continuare correttamente.
+
Then start the Spirit Settings again - this time it should continue correctly.

Latest revision as of 09:23, 15 January 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Spirit Settings under Windows)
If you can see '''Scanning devices''' message with no change over more than 10 seconds reboot your computer and turn off the Bluetooth module (if enabled on your computer).
Then start the Spirit Settings again - this time it should continue correctly.
TranslationIf you can see '''Scanning devices''' message with no change over more than 10 seconds reboot your computer and turn off the Bluetooth module (if enabled on your computer).
Then start the Spirit Settings again - this time it should continue correctly.

If you can see Scanning devices message with no change over more than 10 seconds reboot your computer and turn off the Bluetooth module (if enabled on your computer). Then start the Spirit Settings again - this time it should continue correctly.

Retrieved from "https://manual.spirit-system.com/index.php?title=Translations:Spirit_Settings_under_Windows/15/en&oldid=45698"