Difference between revisions of "Stratos 200"
From Spirit System Manual
| Line 11: | Line 11: | ||
*'''PIT''' (Center pin) - Green cable for RPM readings | *'''PIT''' (Center pin) - Green cable for RPM readings | ||
| − | *'''SAT1''' - ESC Telemetry cable - [https://store.spirit-system.com/en/esc-telemetry/33-jstservo-cable.html JST-Servo] adapter required | + | *'''SAT1''' - ESC Telemetry cable - [https://store.spirit-system.com/en/esc-telemetry/33-jstservo-cable.html JST-Servo] adapter required. Signal wire must be connected closer to the main pin headers. |
===Spirit 3, Spirit GT=== | ===Spirit 3, Spirit GT=== | ||
| Line 26: | Line 26: | ||
#Then install the Firmware '''4.0.4-STRATOS''' from the Firmware List. | #Then install the Firmware '''4.0.4-STRATOS''' from the Firmware List. | ||
#After flashing you can start the Setup Wizard that include all required details about wiring and settings. | #After flashing you can start the Setup Wizard that include all required details about wiring and settings. | ||
| + | |||
| + | [[File:StratosFirmware.png|550px]] | ||
Revision as of 12:02, 15 May 2026
Spirit units are fully compatible with Stratos 200 and will offer out of the box experience with the latest Spirit 4.0.4 firmware and software. For the best performance we recommend Spirit 3, Spirit W3, Spirit GT, Spirit GTR or Spirit W1 units. These have full support for DShot300 protocol.
1 Wiring
You can wire Stratos according following scheme:
- CH1 - S2 Servo
- CH2 - S1 Servo
- CH3 - S3 Servo
- PIT (Center pin) - Green cable for RPM readings
- SAT1 - ESC Telemetry cable - JST-Servo adapter required. Signal wire must be connected closer to the main pin headers.
1.1 Spirit 3, Spirit GT
- AUX2 - Blue cable (Tail Motor)
- AUX1 - ESC cable (Main Motor)
1.2 Spirit W1, Spirit W3, Spirit GTR
- AUX - Blue cable (Tail Motor)
- THR - ESC cable (Main Motor)
2 Starting
- First please install the latest PC software 4.0.4 from our Download section.
- Then install the Firmware 4.0.4-STRATOS from the Firmware List.
- After flashing you can start the Setup Wizard that include all required details about wiring and settings.
