Difference between revisions of "Spirit RX Wiring"
From Spirit System Manual
(Created page with "== Wiring == === Spirit GT === Spirit GT unit require only a direct cable between RUD port and port 2 '''X''' of the Wave receiver. File:spiritrx-wiring-gt.jpg === Spir...") |
(No difference)
|
Revision as of 14:07, 21 October 2024
Contents
1 Wiring
1.1 Spirit GT
Spirit GT unit require only a direct cable between RUD port and port 2 X of the Wave receiver.
1.2 Spirit W1
Spirit W1 unit require only a direct cable between T1 port and port 2 X of the Wave receiver.
1.3 Spirit 1, Spirit 2, Spirit Pro, Spirit RS, Spirit GTR, microSpirit
You will need JETI Integration Cable connected at the RUD port (Red and Brown wires) + AIL pin (Orange wire) at the Spirit side, while second end of the cable must be connected at the port 2 X of the Wave receiver.
