Difference between revisions of "Stratos 200"
From Spirit System Manual
(Created page with "Spirit units are fully compatible with Stratos 200 and will offer out of the box experience with the latest Spirit 4.0.4 firmware and software. For the best performance we rec...") |
(No difference)
|
Revision as of 11:51, 15 May 2026
Spirit units are fully compatible with Stratos 200 and will offer out of the box experience with the latest Spirit 4.0.4 firmware and software. For the best performance we recommend Spirit 3, Spirit W3, Spirit GT, Spirit GTR or Spirit W1 units. These have full support for DShot300 protocol.
1 Wiring
1.1 Spirit 3, Spirit GT
CH1 - S2 Servo CH2 - S1 Servo CH3 - S3 Servo
AUX2 - Blue cable (Tail Motor) AUX1 - ESC cable (Main Motor) PIT (Center pin) - Green cable for RPM readings SAT1 - ESC Telemetry cable - JST-Servo adapter required
2 Starting
- First please install the latest PC software 4.0.4 from our Download section.
- Then install the Firmware 4.0.4-STRATOS from the Firmware List.
- After flashing you can start the Setup Wizard that include all required details about wiring and settings.
