Scorpion Telemetrie
Regulátory Scorpion Tribunus ESC zasílají telemetrii pomocí programovacího portu. Tímto je zprostředkován přenos dat až do jednotky.
Contents
1 Nastavení regulátoru
Aby přenos ESC telemetrie fungoval, je nezbytné nastavit telemetrický režim Unsolicited. S ostatními režimy telemetrie fungovat nebude. Nastavte Communication protocol na Unsc Telem v programu Scorpion Tribunus. Pro konfiguraci je zapotřebí Scorpion V link II Cable.
2 Telemetrická propojka
Telemtrické data je možné přenášet skrze speciální propojku Telem UNI. Je dostupná na našem Eshopu.
3 Zapojení
Connect the Telemetry cable to the primary Spektrum satellite port in the unit. Smaller Spirit units will utilize the one native Spektrum satellite port.
Servo connector of the Telem UNI cable should be connected to the ESC - programming port (P).
4 Spirit Settings
Power up the ESC and start the Spirit Settings as usually.
4.1 Telemetry activation
As the last step you have to set the ESC Telemetry in the Spirit Settings software.
Go to the Advanced/Telemetry settings and set the Scorpion Tribunus option.
Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.
From this moment, everything should work.
5 Displaying telemetry data
You can display telemetry data directly in your radio from now.
How to display the data is described in the integration guides:
6 Supported models
|
Model |
Battery Voltage |
Battery Current |
BEC Voltage |
Consumed Capacity |
ESC Temperature |
|---|---|---|---|---|---|
| Scorpion Tribunus 06-120A (SBEC) | ✔ | ✔ | ✔ | ✔ | ✔ |
| Scorpion Tribunus 06-120A (OPTO) | ✔ | ✔ | ✔ | ✔ | ✔ |
| Scorpion Tribunus 14-200A (SBEC) | ✔ | ✔ | ✔ | ✔ | ✔ |
