Hyperion RPM Sensor

From Spirit System Manual

Revision as of 13:59, 12 April 2018 by Admin (Talk | contribs) (Created page with "<languages /> <p></p> <translate> Hyperion RPM Sensor is standard unit for measuring RPM from one phase wire.</translate> File:hyperion-rpm-sensor.jpg == <transla...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Other languages:

čeština • ‎Deutsch • ‎English • ‎magyar • ‎italiano • ‎русский

Hyperion RPM Sensor is standard unit for measuring RPM from one phase wire.

Required modification

For usage with the Spirit units a small modification of the RPM cable is needed.

Move the White cable to the middle in the Servo connector.
You can do so with a needle easily.

Wire layout: White wire: RPM Output Signal (PIT pin); Red wire: BEC Voltage (AUX1/AUX2/CH0 or other power supply port); Brown wire: Ground (AUX1/AUX2/CH0 or other power supply port)

Connect the cables according the photo now.

Retrieved from "https://manual.spirit-system.com/index.php?title=Hyperion_RPM_Sensor&oldid=20905"