SpiritRS Telemetry

Spirit RS is equipped with 2 separate inputs for JETI model sensors. These sensors are completely compatible and can be used in the same way as with REX-line receivers.

If you will need to connect more sensors, you can use JETI model EXPANDER. So you are able to virtually connect up to 8 telemetry sensors at the same time.

Available telemetry ports:

• E1
• EXT

By default both are configured as JETIBOX/Sensor which mean you do not have to do any other adjustments, just connect the sensors.

1 Telemetry Sensor Wiring

1.1 E1 port

Connect Sensor or Expander cable directly without any change.

1.2 EXT port

Connect Sensor or Expander cable in so that RED/BROWN wires are at the AUX port (or any other free powering port) and ORANGE wire at the EXT pin. In case of lack of free ports, please use an Y-cable.

Original connector must be modified so that two servo connectors are used. You can use JETI integration cable for this purpose.