Scorpion Telemetria

Scorpion Tribunus ESC ha la funzione di telemetria integrata nella porta di programmazione. Ciò consente la trasmissione dei dati di telemetria all'unità.

1 ESC configurazione

Per abilitare la telemetria ESC, è necessario impostare la modalità telemetria Unsolicitednell'ESC. Con altre modalità la telemetria non funzionerà. Modificare Protocollo di comunicazione in Unsc Telem nel software Scorpion Tribunus. For this purpose Scorpion V link II Cable is needed.

2 Telemetry Cable

To allow the telemetry data transmission the Telem UNI cable is required. This cable is available in our Eshop.

3 Interfacing

Connect the Telemetry cable to the primary Spektrum satellite port in the unit. Smaller Spirit units will utilize the one native Spektrum satellite port.

Servo connector of the Telem UNI cable should be connected to the ESC - programming port.

4 Spirit Settings

Power up the ESC and start the Spirit Settings as usually.

4.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the Scorpion Tribunus option.

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

5 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

• JETI Duplex
• FrSky Taranis & Horus
• Graupner HoTT

6 Supported models

Model	Battery Voltage	Battery Current	BEC Voltage	Consumed Capacity	ESC Temperature	RPM
Scorpion Tribunus 06-120A (SBEC)	✔	✔	✔	✔	✔	✔
Scorpion Tribunus 06-120A (OPTO)	✔	✔	✔	✔	✔	✔
Scorpion Tribunus 14-200A (SBEC)	✔	✔	✔	✔	✔	✔