Spirit Wave Model
From Spirit System Manual
Revision as of 12:48, 18 October 2024 by Admin (Talk | contribs) (Created page with "In order to start with the Wave Radio it is required to create so called '''Model'''. Each model inside the Radio can be bound to specific Receiver. For this reason it is comm...")
In order to start with the Wave Radio it is required to create so called Model. Each model inside the Radio can be bound to specific Receiver. For this reason it is common to have multiple Models stored inside the Wave Radio for each of your physical R/C model. In other words, one Model per each R/C model.
Spirit Wave radio has default Model precreated (for Helicopter) when it is launched for the first time or after Factory Defaults.
Model Creation
Press at the Home icon at the bottom panel.
Continue with the CREATE button and confirm Dialog with YES.
From then choose appropriate Model Type that correspond to your R/C model.
If it is unlisted type such as a Boat you can use other type - for example Car.
