Futaba PPM
From Spirit System Manual
In order to use PPM single-line connection with Futaba receivers you will need to modify default channel assignment to the following layout. These transmitters are labelled with SP mark.
1 Software Channel Mapping
Set the channel mapping in the General/Channels window to:
- Trottle: Channel 1
- Aileron: Channel 2
- Elevator: Channel 3
- Rudder: Channel 6
- Gyro Gain: Channel 4
- Pitch: Channel 5
- Bank: Channel 7 (optional)
2 Transmitter Channel Mapping
- Throttle: Channel 1
- Aileron: Channel 2
- Elevator: Channel 3
- Rudder: Channel 4
- Gyro Gain: Channel 5
- Pitch: Channel 6
- Bank: Channel 7 (optional)
