Translations:GeoLink Mounting/37/en

From Spirit System Manual
Revision as of 13:31, 28 July 2018 by FuzzyBot (Talk | contribs) (Importing a new version from external source)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. Connect GeoLink and Spirit unit with provided cable (while GeoLink being not mounted yet).
  2. Power up the Spirit unit.
  3. After initialization start the Spirit Settings software.
  4. Open General tab - GeoLink module settings.
  5. Move to the Module tab there.
  6. Place GeoLink at a flat, aligned horizontal surface anywhere on your model in order to get a precise reference. (for example the Spirit unit)
  7. Click Set as zero (temporarily) button to reset the angle.
  8. Move GeoLink to a desired mounting position.
  9. Mount it with provided double sided tape at position ideally with 0° deflection.
Retrieved from "https://manual.spirit-system.com/index.php?title=Translations:GeoLink_Mounting/37/en&oldid=21572"