Translations:SpiritRS Binding/3/en

From Spirit System Manual
Revision as of 13:47, 3 June 2020 by FuzzyBot (Talk | contribs) (Importing a new version from external source)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. Insert Bind plug in the SYS port and connect Power supply to the Spirit unit. (For example ESC/BEC at the THR port)
  2. Spirit unit will start to blink with the Status LED periodically.
  3. Then power up your radio.
  4. Radio will ask if you wish to use the receiver. Confirm by pressing Yes button.
Retrieved from "https://manual.spirit-system.com/index.php?title=Translations:SpiritRS_Binding/3/en&oldid=30801"